Links:

 

GVSU

Admission to GVSU

 

School of Engineering

     BSE Programs

     MSE Programs

 

Blackboard

 

  1. Wael A. Mokhtar and Ryan Lubbers, “CFD Modeling Varied Cannula Infusion of Insulin in Subcutaneous Adipose Tissuee”, ASME IMECE 2024, paper no. IMECE2024-144161, November, 2024  (under review)
  2. Anisur R. Ikram, Wael A. Mokhtar, and Sanjivan Manoharan, “Numerical Investigation of Leading-Edge Bioinspired Tubercles on an Asymmetric NACA Airfoil “, 2024 AIAA AVIATION Forum and 2024 ASCEND, paper no. 4056019 , July 2024 (under review)
  3. Wael A. Mokhtar and Sumaiya Benta Nasir,  “The Effect of Injection Molding Process Parameters on the mechanical properties of ABS and PP polymer”, ASEE North Central Section Conference, paper no. 44634, March, 2024
  4. Wael A. Mokhtar and Ryan Lubbers, “CFD Modeling of Interstitial Fluid Flow in Subcutaneous  Tissue”, ASME IMECE 2022, paper no. IMECE2022-90593, November, 2022
  5. Wael A. Mokhtar, “Computational Fluid Dynamics and Students’ Creativity”, ASME IMECE 2021, paper no. IMECE2021-73009, November, 2021.
  6. Wael A. Mokhtar, “Open-Ended Design Project: An Effective Tool for Technical and Professional Growth”, ASME IMECE 2020, paper no. IMECE2020-20568, November, 2020. (Presentation)
  7. Wael A. Mokhtar,”30 Years of Co-operative Education: Remarkable History and Bright Future ”,ASEE AC 2020, R411·Joint Panel: Leveraging Experiential Education to Become an Engineering Education Leader;, June, 2020. (Presentation)
  8. Wael A. Mokhtar, Kyle Dinger, Shardul Kachare, Md Razib Hossain and Colin P. Britcher , “A CFD study investigating drag reduction for different offset and inline distance for two trucks platooning ”, JEPE, Journal of Energy and Power Engineering, doi: 10.17265/1934-8975/2020.05.001, Vol. 14, No. 5, Serial Number 15, pp: 143-150, May, 2020.
  9. Wael A. Mokhtar and Samira Ishrat Jahan , “CFD Study of Aerodynamic Flow around a Generic Sports Utility Vehicle (SUV)”, ASEE North Central Conference, Paper no: 76, Grand Rapids, MI, March, 2019.
  10. Wael A. Mokhtar Clayton Spore, Bhagawan Upreti, and Spencer Boer , “CFD Model Development of Aortic Blood Flow”, ASEE North Central Conference, Paper no: 77, Grand Rapids, MI,, March, 2019.
  11. Sanjivan Manoharan and Wael A. Mokhtar, “Computational Investigation of Aerodynamic and Heat Transfer Characteristics of a Confined Offset Turbulent Jet Impinging on a Flat Surface”, 2018 AIAA Aviation and Aeronautics Forum and Exposition, paper no. AIAA-2900229, June, 2018.
  12. Wael A. Mokhtar Md Maruf Hossain, and Samira Ishrat Jahan , “A parametric CFD study of a generic pickup truck and rear box modifications”, ASEE North Central Conference, Paper no: 13, Akron, OH, March, 2018.
  13. Wael A. Mokhtar and Ratan  Ghosh, “A CFD study of air circulation in an air-conditioned room”, ASEE North Central Conference, Paper no: 14, Akron, OH, March, 2018.
  14. Wael A. Mokhtar and Mohammad Adom Safiullah, “CFD modeling air-conditioning of a car”, ASEE North Central Conference, Paper no: 15, Akron, OH, March, 2018.
  15. Wael A. Mokhtar, and Shardul Kachare, “A Computational Study to Investigate the Effect of Varying Ground Clearances and Angle of Attack for a Double-Element Front Wing of a Formula 1 Racecar”, International Journal of Engineering Science and Innovative Technology (IJESIT), Vol. 6, Issue 6, pp: 43-53, November 2017
  16. Wael A. Mokhtar, “An Undergraduate CFD Course: Balance Between Depth and Applied Skills”, ASME IMECE 2017, paper no. IMECE2017-70922, November, 2017.
  17. Wael A. Mokhtar, Colin P. Britcher, Kyle Dinger, Md Razib Hossain, and Shardul Kachare, “A CFD Parametric Study of Two-Truck Platooning”, SAE Commercial Vehicle Engineering Congress, SAE paper 17CVA-0008, Rosemont, IL, September, 2017.
  18. Wael A. Mokhtar, Kyle Dinger, Chetan Madagi, and Md Razib Hossain, “Effect of Negative Angle Cannulation During Cardiopulmonary Bypass – a Computational Fluid Dynamics Study”, International Journal of Biomedical Engineering and Science (IJBES), Vol. 4, No. 2, April 2017.
  19. Wael A. Mokhtar, and Shardul Kachare, “Predictive Capability of the k-ω SST and Spalart-Allmarus Turbulence Model for a Double-Element Front Wing in Ground Effect - A CFD Analysis”, International Journal of Engineering Science and Innovative Technology (IJESIT), Vol. 6, Issue 2, pp: 55-63, March 2017.
  20. Wael A. Mokhtar, Chetan Madagi and Md Rakibul Hasan, “Further Study of Wall Interference for High Blockage Vehicles in Closed Test Section Wind Tunnels”, International Journal of Modern Engineering Research (IJMER ISSN 2249-6645), Vol. 6, pp:  58-70, October, 2016.
  21. Diane LaFreniere, Chris Plouff, Wael Mokhtar, and Paul Plotkowski, “Organizational Socialization through a Three-Stage Co-op Model Yields Slump-to-Jump Transition during Engineering Mid-Years ”, Mid Years Engineering Experience (MYEE) Conference, College Station, TX, April 2016. (Presentation)
  22. Wael A. Mokhtar and Simon Durrer, “A CFD Analysis of a Race Car Front Wing in Ground Effect”, ASEE North Central Conference, Paper no: 17, Mt Pleasant, MI, March, 2016.
  23. Wael A. Mokhtar and Md Hasan, “A CFD Study of Wind Tunnel Wall Interference”, ASEE North Central Conference, Paper no: 16, Mt Pleasant, MI, March, 2016.
  24. Wael A. Mokhtar and Yash Potdar, “Aerodynamic Drag Reduction Study on Semi-Trucks”, ASEE North Central Conference, Paper no: 18, Mt Pleasant, MI, March, 2016.
  25. Wael A. Mokhtar, “Multi-Level Service Learning Design and Analysis Project”, ASME IMECE 2015, paper no. IMECE2015-50431, November 2015. (Presentation)
  26. Wael A. Mokhtar and Colin P. Britcher,  “Wall Interference of High-Blockage Vehicles – A CFD Study”, SAE Commercial Vehicle Engineering Congress, SAE paper 15CVA-0013 , Rosemont, IL, October 2015. (Presentation)
  27. Wael A. Mokhtar and Shirley Fleischmann, “Introducing CFD and Wind Tunnel Testing in an Undergraduate Fluid Mechanics Course”, JEPE, Journal of Energy and Power Engineering, Vol. 9, pp:  505-516, June 2015. 
  28. Anuj Maloo, Mario Rodriguez-Garcia, Kevin Maddalena,, Ibraheem Saleh , and Wael A. Mokhtar, “CFD and Experimental River Study for the Masters Nationals Regattas”, ASEE North Central Conference, Paper no: 57, Cincinnati, OH, April, 2015.
  29. Wael A. Mokhtar and John M. Witte , “FEA Modeling of Hygroscopic Effects”, ASEE North Central Conference, Paper no: 56, Cincinnati, OH, April, 2015.
  30. Colin P. Britcher and Wael A. Mokhtar, " Boundary Corrections for Wind Tunnel Testing of Large Ground Vehicles in Strong Crosswind Conditions", AIAA Science and Technology Forum 2015, AIAA no 2024128, Kissimmee, FL, Jan 5 to 9, 2015.
  31. Wael A. Mokhtar and Shirley Fleischmann, “Introducing CFD and Wind Tunnel Testing in an Undergraduate Fluid Mechanics Course”, ASME IMECE 2014, paper no. IMECE2014-36552, November 2014.
  32. Colin P. Britcher and Wael A. Mokhtar,  “Simulation Considerations for Commercial Vehicles in Strong Crosswind Conditions”, SAE Commercial Vehicle Engineering Congress, SAE paper no 2014-01-2452, , Rosemont, IL, October 2014.
  33. Mau-Kuo Chen, Wael A. Mokhtar, Colin P. Britcher, and Joe Mc Garry,  “Experimental and Computational Aspects of Ground Simulation for Vehicles in Strong Crosswind Conditions”, SAE World Congress, SAE paper no 2014-01-0588, , Detroit, MI, April 2014.
  34. Wael A. Mokhtar,  “An integrated Service Project for Junior and Senior Students”, International Journal for Innovation Education and Research, IJIER, Vol. 2, No. 4, pp: 93-108, April 2014.
  35. Wael A. Mokhtar, “Mechanical Design and Students’ Creativity – “Think Outside the Box”, Journal of Mechanics Engineering and Automation, JMEA, Vol. 4, No. 3, pp: 177-186, March 2014.
  36. Chris Pung and Wael A. Mokhtar, “Multidisciplinary Industry Sponsored Capstone Engineering Projects- A Success Story”, 2014 ASEE North Central Section Conference, paper no 120, Rochester Hills, MI, March, 2014. [Presentation]
  37. Wael A. Mokhtar, “Introducing Wind Energy to an Undergraduate CFD Course”, 2014 ASEE North Central Section Conference, paper no 110, Rochester Hills, MI, March, 2014. [Presentation]
  38. Wael A. Mokhtar, “Mechanical Design and Students’ Creativity – “Think Outside the Box”, ASME 2013 International Mechanical Engineering Congress & Exposition, Paper no: •IMECE2013-63679, November, 2013.
  39. Wael A. Mokhtar and John M. Witte , “Experimental and Numerical Analysis of Hygroscopic Behavior of a Polymer Material”, ASEE North Central Conference, Columbus, OH, April, 2013.
  40. Wael A. Mokhtar, “Service-Learning in a Capstone Senior Project”, ASME 2012 International Mechanical Engineering Congress & Exposition, Paper no: IMECE2012-85429, November, 2012. [Presentation]
  41. Chris Kaminsky and Wael A. Mokhtar, “Analysis of a Vertical Axis Wind Turbine”, ASEE North Central Conference, Ada, OH, March, 2012.
  42. Allen Page  and Wael A. Mokhtar, “CFD Simulation of Carotid Artery Stenosis – Simplified Model”, ASEE North Central Conference, Ada, OH, March, 2012.
  43. Nahid Pervez and Wael A. Mokhtar, “CFD Study of a Darreous Vertical Axis Wind Turbine”, ASEE North Central Conference, , Ada, OH, March 2012.
  44. Wael A. Mokhtar  and Nahid Pervez “Underbody Drag for Pickup Trucks”, 30th AIAA Applied Aerodynamics Conference, New Orleans, Louisiana, AIAA paper no 2012-2231, June 2012.
  45. Wael Mokhtar,”Introducing SAE Baja in a Sophomore Mechanics and Machines Course”, ASEE Middle Atlantic Section Fall Conference 2011,  Temple University, Philadelphia, Pa, October 28-29, 2011
  46. Wael Mokhtar, “Design Experience in a Sophomore Mechanics and Machines Course”, ASME 2011 International Mechanical Engineering Congress & Exposition, Paper no: IMECE2011-62736, November 11-17, 2011.
  47. Wael A. Mokhtar, “Project-Based Learning (PBL) – An Effective Tool to Teach an Undergraduate CFD Course”, 2011 ASEE Annual Conference, ASEE no. 973, Vancouver, BC, Canada, June 26-29, 2011.
  48. Julie Kim, Justin Pattermann, Varun Menon, and Wael Mokhtar, “A CFD Study of Pickup Trucks Aerodynamics”, ASEE NC conference, Central Michigan University, April 1-2, 2011.
  49. Wael Mokhtar and Gilbert Ngugi, “Using High Lift Airfoil for Vertical Axis Windmill - A Parametric CFD Study”, ASEE NC conference, Poster session, Central Michigan University, April 1-2, 2011.
  50. Wael A. Mokhtar, “Using Computational Fluid Dynamics to Introduce Critical Thinking and Creativity in an Undergraduate Engineering Course”, The International Journal of Learning, Common Ground Publisher, vol. 17, no. 9, pp: 441-458, December 2010.
  51. Shirley Fleischmann, Mehmet Sozen and Wael Mokhtar, “A Green Heat Transfer Design Project to Introduce Globalization and Society Awareness”, ASME 2010 International Mechanical Engineering Congress & Exposition, Paper no: IMECE2010-38285, November 12-18, 2010.
  52. Wael A. Mokhtar  and Robert E. Camp “Pickup Trucks - Box Configuration and Drag Reduction ”, 28th AIAA Applied Aerodynamics Conference, AIAA paper no 225367, June, 2010.
  53. Wael A. Mokhtar, “Capstone Senior Project Mentoring and Student Creativity”, 2010 ASEE Annual Conference, ASEE no. AC 2010-921, June 20-23, 2010.
  54. Wael A. Mokhtar, “Using Computational Fluid Dynamics to Introduce Critical Thinking and Creativity in an Undergraduate Engineering Course”, 17th International Conference on Learning, Hong Kong Institute of Education, Hong Kong, paper no L10P0257, July 6 - 9, 2010.
  55. Pramod Chaphalkar, Wael A. Mokhtar, and Janice Pawloski, “Using Guided Project and Reverse Engineering to Develop Critical Thinking”, 2010 ASEE North Central Sectional Conference, Paper no. 130,  Pittsburgh, PA, March 26-27, 2010.
  56. Wael A. Mokhtar, “Introducing a Two-Semesters Research Course in the Freshman Year”, 2009 ASEE Annual Conference, ASEE no. AC 2009-2416, June 14 - 17, 2009.
  57. Robert Hildebrand, Wael A. Mokhtar, and Steve Bryan, “Vehicle Dynamics as an Elective Sequence: Capitalizing on Breadth and Duration”, 2009 ASEE Annual Conference, ASEE no. AC 2009-958, June 14 – 17, 2009.
  58. Wael A. Mokhtar and Jonathan Lane, “Racecar Front Wing Aerodynamics”, SAE International Journal of Passenger Cars - Mechanical Systems, SAE paper no. 2008-01-2988, vol. V117-6, pp: 1392-1403, April 2009.
  59. Wael A. Mokhtar and Colin P. Britcher “Boundary Interference of High Blockage Models in Open Jet Test Sections”, SAE International Journal of Passenger Cars - Mechanical Systems, SAE paper no 2008-01-1201, vol. V117-6, pp: 883-895, April 2009.
  60. Wael A. Mokhtar, “Using CFD, CAD, Rapid Prototyping and Wind Tunnel Testing to Foster Undergraduate Research”, ASEE North Central Section Conference April 3-4, 2009. [Presentation]
  61. Paul Duesing and Wael A. Mokhtar, “Active Discovery and Engineering Problem Solving (EPS) Techniques –An Effective Approach to Teach a Freshman Level CAD Course”, ASEE North Central Section Conference April 3-4, 2009. (Best paper award)
  62. Wael A. Mokhtar, Colin P. Britcher, and Robert E. Camp “Further Analysis of Pickup Trucks Aerodynamics”, SAE World Congress, SAE paper no 2009-01-1161, April 2009.
  63. Wael A. Mokhtar and Matthew Carroll, “ABET Accreditation - Realization in Thermo/Fluid Courses”, AIAA 47th Aerospace Science Meeting and Exhibit, AIAA paper no. AIAA-2009-570, January 2009.
  64. Wael A. Mokhtar and Jonathan Lane, “Racecar Front Wing Aerodynamics”, SAE Motorsports Engineering Conference, SAE paper 2008-01-2988, December 2008.
  65. Wael A. Mokhtar and Paul R. Duesing “Using Research and Applied Projects to Enhance Learning in Mechanical Engineering Design Courses”, The International Journal of Learning, Common Ground Publisher, vol. 15, no. 9, pp: 265-274, December 2008.
  66. Wael Mokhtar, Morrie Walworth, Justin Hester, and Gail Dyer, ”Distance Learning and Student Recruiting Using an Internet Controlled Robot”, The International Journal of Learning, Common Ground Publisher, vol. 15, no. 8, pp: 277-286, November 2008.
  67. Wael Mokhtar, Paul Duesing and Robert Hildebrand, “Integration of the Project-Based Learning (PBL) into the Mechanical Engineering Programs”, The International Journal of Learning, Common Ground Publisher, vol. 15, no. 8, pp: 265-276, November 2008.
  68. Paul Duesing, Wael Mokhtar, Taskin Padir, Sherry Duesing, and Kimberly Muller, “Lessons Learned From A Successful Multi-Level Assessment Process”, The 2008 Assessment Institute, IUPUI, Purdue University & Indiana University, Indianapolis, Indiana, October 2008.
  69. Wael Mokhtar, Morrie Walworth, Justin Hester, and Gail Dyer, ”Distance Learning and Student Recruiting Using an Internet Controlled Robot”, 15th International Conference on Learning, University of Illinois, Chicago, paper no L080662, June 2008.
  70. Wael Mokhtar, Paul Duesing and Robert Hildebrand, “Integration of the Project-Based Learning (PBL) into the Mechanical Engineering Programs”, 15th International Conference on Learning, University of Illinois, Chicago, paper no L080714, June 2008.
  71. Wael A. Mokhtar and Paul R. Duesing “Using Research and Applied Projects to Enhance Learning in Mechanical Engineering Design Courses”, 15th International Conference on Learning, University of Illinois, Chicago, paper no L08P0266, June 2008.
  72. Wael A. Mokhtar “Aerodynamics of High-lift Wings with Ground Effect for Racecar”, SAE World Congress, SAE paper no 2008-01-0656, April 2008.
  73. Wael A. Mokhtar and Colin P. Britcher “Boundary Interference of High Blockage Models in Open Jet Test Sections”, SAE World Congress, SAE paper no 2008-01-1201, April 2008.
  74. Wael A. Mokhtar and Colin P. Britcher, “A Numerical Method to Predict Boundary Distortion and Interference of Open Jet Test Sections”, 37th AIAA Fluid Dynamics Conference and Exhibit, AIAA paper no. 2007-4508, June 2007.
  75. Wael A. Mokhtar and Colin P. Britcher, “Wind Tunnel Boundary Corrections for a Full Scale 1903 Wright Flyer Replica.” Journal of Aircraft, vol.43 no.1 pp 64-71, Jan 2006.
  76. Colin P. Britcher and Wael A. Mokhtar “Comparison of Aerodynamic Measurements on a Full-Scale NASCAR in Open and Closed-Jet Test Sections”, SAE World Congress, SAE paper no 2005-01-0871, Vehicle Aerodynamics SAE transaction: SP-1931, pp: 203-213, April 2005, SAE transaction Journal of Passenger Car, pp: 982-992, February 2006.
  77. Wael A. Mokhtar “A Numerical Study of High-Lift Single Element Airfoils With Ground Effect For Racing Cars”, SAE World Congress, SAE paper no. 2005-01-0607, Vehicle Aerodynamics SAE transaction: SP-1931, pp: 129-135, April 2005, SAE transaction Journal of Passenger Car, pp: 682-688, February 2006.
  78. Mohamed S. Azzouz and Wael A. Mokhtar “Fluid Structure Interaction - Nonlinear Flutter of Cylindrical Panels”, AIAA 44th Aerospace Science Meeting and Exhibit, AIAA paper no 2006-693, Jan 2006.
  79. Wael A. Mokhtar, Mohamed Khalil, Kamel Elshorbagy, Sadek Kassab, and Alaa Elmiligui, “Aerodynamics of the Inclined Offset Turbulent Jets”, AIAA 44th Aerospace Science Meeting and Exhibit, AIAA paper no 2006-911, Jan 2006.
  80. Wael A. Mokhtar, Xu Zheng, Ilteris  Koc and Kursat Kara,, “Aerodynamics and Flow Control of Flapping Wings”, AIAA 44th Aerospace Science Meeting and Exhibit, AIAA paper no 2006-1059, Jan 2006.
  81. Wael A. Mokhtar, Mohamed Khalil, Kamel Elshorbagy, Sadek Kassab, and Alaa Elmiligui, “Experimental and Numerical Parametric Study of the Plane-Offset Jet Impinging on a Flat Surface”, 35th AIAA Fluid Dynamics Conference and Exhibit, AIAA paper no 2005-5012, June 2005.
  82. Colin P. Britcher, Eric Koster, Drew Landman and Wael Mokhtar, “Challenges and Future Prospects for Automotive Testing in the NASA Langley 14 by 22 Low-Speed Wind Tunnel”, Subsonic Aerodynamic Testing Association (SATA) 41st Annual Meeting, May 2005
  83. Wael A. Mokhtar “A Numerical Parametric Study of High-Lift Low Reynolds Number Airfoils”, AIAA 43rd Aerospace Science Meeting and Exhibit, AIAA paper no. 2005-1355, Jan 2005.
  84. Wael A. Mokhtar and Colin P. Britcher, “Study of Real Time Wind Tunnel Boundary Corrections Using Panel and Pressure Signature Methods”, AIAA 43rd Aerospace Science Meeting and Exhibit, AIAA paper no. 2005-905, Jan 2005.
  85. Wael A. Mokhtar and Colin P. Britcher, “Wind Tunnel Boundary Corrections for a Full Scale 1903 Wright Flyer Replica”, AIAA 24th Aerodynamics Measurements Technology and Ground Testing Conference, AIAA paper no. 2004-2309, June 2004.
  86. Wael A. Mokhtar and Colin P. Britcher, “Boundary Interference Assessment and Correction for Open Test Section Wind Tunnels Using Panel Methods”, AIAA 42nd Aerospace Science Meeting and Exhibit, AIAA paper no. 2004-609, Jan 2004.
[Home] [Courses] [Publications] [Research Areas] [Grad Students] [Student Projects] [Learn CFD at GVSU] [SAE Student Chapter]